News Details

Home > News >

Company news about The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

Events

News

Cases

Ms. Huang

carly.huang@foxmail.com

86-0757-85850560

86 15813688760

Contact Now

The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

2026-10-07

Visualize the process discipline by making "drop height", "rotor speed", "chlorine gas ratio", and "filter box pressure drop" into signboards, hanging them in front of the furnace, not written in the filing cabinet.
Molten quality online monitoring hydrogen content meter: It must be measured for each furnace, and no casting is allowed if it exceeds the standard. Metallographic rapid analysis: Low magnification samples must be cut every time they are cast, and if possible, equipped with an online slag inclusion detector (LiMCA/PoDFA) to quantify the number of oxide inclusions.
Establish a defect traceability loop that includes ingot number, melt number, refining record, gas flow rate, and operator traceability chain. Once peeling is found during rolling, check the records of the filter box and the chlorine gas ratio curve on duty.
The quality awareness of all staff oxidizes leather slag, with 70% being "operated" rather than "equipment". The training of slag removal workers, flow channel workers, and casting workers is more important than engineers writing standards.

News Details

Home > News >

Company news about-The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

Events

News

Cases

The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

2026-10-07

Visualize the process discipline by making "drop height", "rotor speed", "chlorine gas ratio", and "filter box pressure drop" into signboards, hanging them in front of the furnace, not written in the filing cabinet.
Molten quality online monitoring hydrogen content meter: It must be measured for each furnace, and no casting is allowed if it exceeds the standard. Metallographic rapid analysis: Low magnification samples must be cut every time they are cast, and if possible, equipped with an online slag inclusion detector (LiMCA/PoDFA) to quantify the number of oxide inclusions.
Establish a defect traceability loop that includes ingot number, melt number, refining record, gas flow rate, and operator traceability chain. Once peeling is found during rolling, check the records of the filter box and the chlorine gas ratio curve on duty.
The quality awareness of all staff oxidizes leather slag, with 70% being "operated" rather than "equipment". The training of slag removal workers, flow channel workers, and casting workers is more important than engineers writing standards.

86 15813688760

Quick link

Home About Us Products News Cases Contact Us

Quick Contact

Address

D12, Zone D, 3F, Comprehensive Building, Beside Yongkou Archway, Pingliu Road, Xiadong Community, Guicheng Subdistrict, Nanhai District, Foshan

Tel

86-0757-85850560

E-mail

carly.huang@foxmail.com

86 15813688760

Our Newsletter

Subscribe to our newsletter for discounts and more.

Aluminum Melting Furnace

Homogenizing Furnace

Billet Casting Machine

Billet Cutting Machine

Regenerative Burner System

Continuous Casting Machine Parts

Aluminum Melting Furnace

Homogenizing Furnace

Billet Casting Machine

Billet Cutting Machine

Regenerative Burner System

Continuous Casting Machine Parts

News Details

Company news about The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

News

Cases

The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

Company news about-The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"

News

Cases

The Implementation of Quality Management System: From "Manual Control" to "Automatic Control"